[Healeys] Another con - fused question

[Richard Ewald]

Only items downstream from the fuse will be protected by that fuse.  So if
you put the fuse downstream of the relay, the relay won't be covered.  If
you put it upstream on the relay the relay will be protected.


On Tue, Jan 1, 2013 at 11:01 AM, john spaur <jmsdarch at sbcglobal.net> wrote:

> There are two white wires going to the OD relay. One comes from the fuse
> block at A3.
>
> The other goes from the relay down to the overdrive switch on the dash. Is
> this the correct wire to fuse?
>
> TIA
> John Spaur
> ______________________________**_________________
> Support Team.Net http://www.team.net/donate.**html<http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/**listinfo/healeys<http://autox.team.net/mailman/listinfo/healeys>
>
> Unsubscribe/Manage: http://autox.team.net/mailman/**
> options/healeys/richard.ewald@**gmail.com<http://autox.team.net/mailman/options/healeys/richard.ewald@gmail.com>