[Healeys] Further to Safety Check

[Oudesluys]

In general it is not wise to reuse nyloc nuts on critical suspension or 
brake parts. Use new nyloc nuts but far better is to use castellated 
nuts, wire lock nuts or locknuts (two nuts on top of each other). Best 
to always use Locktite or similar.
Kees Oudesluijs
NL


Op 14-2-2013 21:35, Stephen Hutchings schreef:
> I guess this all depends on how much thinner the thin nyloc nuts are, 
> They just need to be a little bit thinner to get a satisfying 
> protrusion of thread.
> Stephen, BJ8