[Healeys] off-set camber bushing sources

[warthodson at aol.com]

I am using non-offset original style "rubber" bushings & they have not
squished out.
Gary Hodson


-----Original Message-----
From: Tracy Drummond <bighealey at charter.net>
To: warthodson <warthodson at aol.com>
Sent: Thu, Feb 7, 2013 5:14 pm
Subject: Re: [Healeys] off-set camber bushing sources


They need to be poly or they will squish out fast.   I use them for about 5
years

Sent from my iPhone

On Feb 7, 2013, at 9:13 AM, warthodson at aol.com wrote:

> A friend is looking for a source for off-set camber bushings (top trunnion
> bushings) for a 3000 that are not "hard as a rock".
> Any suggestions?
> Gary Hodson
> _______________________________________________
> Support Team.Net http://www.teamh\.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/bighealey@charter.net