[Healeys] off-set camber bushing sources

John Vrugtman javrugtman at htcnet.org
Thu Feb 7 18:53:37 MST 2013


Well, if you install the adjustable shock mounts, then you can use the 
original rubber bushes.

John
64/66 BJ8s, one with nylon offset bushes, one with adjustable shock mounts

On 2/7/2013 8:42 PM, warthodson at aol.com wrote:
> Steve,
> I am specifically looking for off-set bushings that are not "rock hard". If by
> plastic you are referring to nylon or any other plastic that is not somewhat
> compliant, that is not what I am looking for. If they are somewhat compliant &
> off-set that is what I want.
> Do you know which they are or can you give me a part #?
> Gary
>
>
> -----Original Message-----
> From: Steve B. Gerow <steveg at abrazosdata.com>
> To: healeys <healeys at autox.team.net>
> Sent: Thu, Feb 7, 2013 3:39 pm
> Subject: Re: [Healeys] off-set camber bushing sources
>
>
> Suggest the offset plastic bushings offered by David Nock.
>
> I'm using the Cape bronze/steel setup which required quite a bit of machining
> to
> get to fit right. Not recommended.
>
> Never noticed any effect on the ride from this mod.
>
>
> --
> Steve Gerow


More information about the Healeys mailing list