[Healeys] off-set camber bushing sources

[warthodson at aol.com]

Steve,
I am specifically looking for off-set bushings that are not "rock hard". If by
plastic you are referring to nylon or any other plastic that is not somewhat
compliant, that is not what I am looking for. If they are somewhat compliant &
off-set that is what I want.
Do you know which they are or can you give me a part #?
Gary


-----Original Message-----
From: Steve B. Gerow <steveg at abrazosdata.com>
To: healeys <healeys at autox.team.net>
Sent: Thu, Feb 7, 2013 3:39 pm
Subject: Re: [Healeys] off-set camber bushing sources


Suggest the offset plastic bushings offered by David Nock.

I'm using the Cape bronze/steel setup which required quite a bit of machining
to
get to fit right. Not recommended.

Never noticed any effect on the ride from this mod.


--
Steve Gerow
BN6
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/warthodson@aol.com