[Healeys] set screw

[Michael Salter]

Hi Jim,
As far as I can tell it is an 8BA thread. The OD of the one I have is
0.083" and it looks like around 58 TPI, bit hard to measure without a
comparator.
8 BA is 0.0866 OD and 59.1 TPI
Unfortunately the smallest BA tap I have is 6 BA so I cannot check the
female thread for you.
1/16 and 52 British Cycle threads are also close but I would bet on the 8BA
as it is the closest.

Michael S
BN1 #174

BTW I have a complete BJ8 glove box c/w key that I will sell for 50% of the
MM price.


On Wed, Dec 25, 2013 at 10:00 PM, <healeymanjim at hansencc.net> wrote:

> what is the size of the set screw that holds the cylinder in the glove box
> lock? TIA hjim
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/michaelsalter@gmail.com
>
>


-- 
Michael Salter