[Healeys] Heat shield

[warthodson at aol.com]

Mine has one spacer (approx. 3/16" thick) on each side of the heat shield. I
am no sure this is original. I do recall that the heat shield cannot be
installed (won't lay flat) without a spacer between it & the intake manifolds.
Also, I installed a gasket on each side of each spacer. I.E. 4 gaskets/carb.
Gary Hodson


-----Original Message-----
From: Keith Bailey <keithbailey5 at bigpond.com>
To: Healeys <Healeys at autox.team.net>
Sent: Thu, Dec 12, 2013 5:58 pm
Subject: [Healeys] Heat shield


Hi list
Could any BT7 Tri- Carb owner please advise which side of heat shield do the
spacers go
the manuals and part catalogue's appear to give different pictures of the
correct position of the spacers thanking you in anticipation
Cheers Keith
BT6
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/warthodson@aol.com