[Healeys] Dash insulation

[Bob Spidell]

Looks like our messages are getting delayed and re-ordered. I sent this almost a half-day ago. 

Bob 


-------------------------------- 
Bob Spidell - San Jose, CA 


We got one for our BN2 from BCS. Worth a shot. 

Bob 


-------------------------------- 
Bob Spidell - San Jose, CA 


Michael, 

If they are like the ones in a BT7 you can make them from the 15# 
(fifteen pound) roofing felt. It helps if you saved the old ones. The 
link below explains the difference between Tar paper and roofing felt 
and mentions Grade D building paper as being similar to Tar paper. 
However, Grade D building paper has more of a brown paper bag finish 
on one side if I recall correctly. 

http://en.wikipedia.org/wiki/Tar_paper 

John 

At 04:30 PM 8/10/2013 -0400, you wrote: 
>A thick tar paper insulation material was installed on the back of the 
>firewall above the heater duct. The material was a very thick tar paper. There 
>were 2 pieces a right and a left. 
>Has anyone any idea if these are available or failing that where to get the 
>material. 
>I'm not looking forward to trying to laminate several layers of construction 
>paper. 
> 
>Michael S