[Healeys] Dash insulation

[Bob Spidell]

We got one for our BN2 from BCS. Worth a shot. 

Bob 


-------------------------------- 
Bob Spidell - San Jose, CA 

----- Original Message -----
From: "john spaur" <jmsdarch at sbcglobal.net> 
To: "Michael Salter" <michaelsalter at gmail.com> 
Cc: healeys at autox.team.net 
Sent: Saturday, August 10, 2013 2:03:58 PM 
Subject: Re: [Healeys] Dash insulation 

Michael, 

If they are like the ones in a BT7 you can make them from the 15# 
(fifteen pound) roofing felt. It helps if you saved the old ones. The 
link below explains the difference between Tar paper and roofing felt 
and mentions Grade D building paper as being similar to Tar paper. 
However, Grade D building paper has more of a brown paper bag finish 
on one side if I recall correctly. 

http://en.wikipedia.org/wiki/Tar_paper 

John 

At 04:30 PM 8/10/2013 -0400, you wrote: 
>A thick tar paper insulation material was installed on the back of the 
>firewall above the heater duct. The material was a very thick tar paper. There 
>were 2 pieces a right and a left. 
>Has anyone any idea if these are available or failing that where to get the 
>material. 
>I'm not looking forward to trying to laminate several layers of construction 
>paper. 
> 
>Michael S 
>_______________________________________________ 
>Support Team.Net http://www.team.net/donate.html 
>Suggested annual donation $12.75 
>Archive: http://www.team.net/archive 
>Forums: http://www.team.net/forums 
> 
>Healeys at autox.team.net 
>http://autox.team.net/mailman/listinfo/healeys 
> 
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/healeys/jmsdarch@sbcglobal.net 
_______________________________________________ 
Support Team.Net http://www.team.net/donate.html 
Suggested annual donation $12.75 
Archive: http://www.team.net/archive 
Forums: http://www.team.net/forums 

Healeys at autox.team.net 
http://autox.team.net/mailman/listinfo/healeys 

Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/bspidell@comcast.net