[Healeys] BJ8 fuel pump banjos

Alan Seigrist healey.nut at gmail.com
Tue Nov 27 02:20:49 MST 2012

Greg -

It's good to soak them for a bit in either fuel or oil (if oil, no need to
over soak) then tighten them to about 20-30 ft lbs.  Drive the car for a
while then check for leaks then retighten until no leaks.  You do it this
way you'll never have a leak again.  No need for fancy-pants washers.



On Mon, Nov 26, 2012 at 12:03 PM, Greg Mandas <gmandas at yahoo.com> wrote:

> List,
> The fuel pump banjos have a flat side and s detent side. Am I right that
> the
> flat side goes next to the pump?
> Also, how do you get them to seal without crushing them? The fibre gaskets
> from Moss aren't sealing well.
> Greg
> Sent from my iPhone.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com

More information about the Healeys mailing list