[Healeys] Problem with triple carbs, running!

[David Porter]

Randy,
 Never liked those seats.. remove the carb piston and needle set the fuel
level in the bowl by sighting down the jet bore and set the float height so
the fuel level is 3/8 inch or so below the opening. That should be pretty
close.. adjust as required.. compare with the other two..
dave

frogeye at porterscustom.com

Porter Customs   2909 Arno NE
Albuquerque, NM USA 87107
505-352-1378
1954 BN2  1959 AN5
Porter Custom Bicycles

cars:
 www.britishcarforum.com/portercustoms.html
gallery:
http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff

GO HERE: http://porterbikes.com/  nice pictures-fun facts-my world


-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Randy Dickson
Sent: Friday, June 29, 2012 1:23 PM
To: 'David Nock'
Cc: healeys at autox.team.net
Subject: Re: [Healeys] Problem with triple carbs, running!

David, This is the third float needle that I have put in on carb #1.  What
should my specs be for float height 7/16?  I will check fuel pressure and
filters, then float bowl and lid #1 and get back to you guys.  

My Healey turned 50 last week and I need to take it out for a drive.
Thanks!