[Healeys] Windshield wipers

warthodson at aol.com warthodson at aol.com
Fri Jul 13 16:41:26 MDT 2012


Scott,
Thanks for the article. I think I can find a rubber blade & insert it into the
OE blade holder per your instructions.
Gary


-----Original Message-----
From: J. Scott Morris <jstmorris at yahoo.com>
To: bspidell <bspidell at comcast.net>; healeys <healeys at autox.team.net>;
warthodson <warthodson at aol.com>
Sent: Fri, Jul 13, 2012 10:39 am
Subject: Re: [Healeys] Windshield wipers




Ok Guys, you may wish to check John Sims website at
http://www.healey6.com/Technical/Wiper%20Blade%20Rubber.pdf
This is an article I did a couple of decades ago and updated in 2008 about
refills for the Healey wiper blades.   A copy is also attached.
--Scott Morris; Simcoe, Ontario, Canada - Keep Smiling, Murphy Lives

--- On Fri, 7/13/12, warthodson at aol.com <warthodson at aol.com> wrote:


From: warthodson at aol.com <warthodson at aol.com>
Subject: Re: [Healeys] Windshield wipers
To: bspidell at comcast.net, healeys at autox.team.net
Received: Friday, July 13, 2012, 8:57 AM

I purchased a set of the Moss Blades recently, too. As you said the metal
part
of the blade is excellent, but the rubber part is way too wide. Very
disappointing. What we now need is what used to be called a "refill". Just the
rubber part with the thin metal blade carrier around it. I think I am going to
try to remove the Moss rubber blade & insert a new rubber blade from my local
auto parts store.
Gary Hoson

-----Original Message-----
From: Bob Spidell <bspidell at comcast.net>
To: healeys <healeys at autox.team.net>
Sent: Thu, Jul 12, 2012 8:43 pm
Subject: [Healeys] Windshield wipers
Listers,  Anyone have a source for wiper blades for a BJ8? I bought a couple
from Moss
and although they looked fine the blade--the rubber part--was about a
half-inch wide and adhered to the windshield so much the wiper motor couldn't
move them! It was raining pretty hard--duh--and luckily I had backup, older
used blades I used for the remainder of the trip.

I ordered a set of 'Trico Classic' 10", but they don't fit the small bayonet
type of wiper arm. A couple years ago I got a set from Napa that fit and
worked great, but they're black.

Also, what is correct for a BJ8--9-inch or 10-inch blades?

TIA,      Bob Spidell - San Jose, CA


More information about the Healeys mailing list