[Healeys] Starting Rebuilt Engine BJ8

[John Sims]

I just put a link to the referenced instructions on my site. Technical page,
Engine section. Read at your leisure!

John Sims, BN6
Aberdeen, NJ
 
http://www.healey6.com


-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Michael J Maloney
Sent: Wednesday, July 04, 2012 9:05 AM
To: healeys at autox.team.net
Subject: [Healeys] Starting Rebuilt Engine BJ8

Listers;

I'm getting mine started at a local reputable garage,including,smoke test
and coolant pressure test.Using rebuilder's recommended performance break-in
oil(joe gibbs).
Next pre oil using my tool to turn distributor drive , check for pressure.
Start up and run between  1800-2000 for 20 minutes varying up and
down.Change oil and filter.
I am to follow precise  directions from AERA-TB1935 nov 2001.This provides a
checklist before and after start up.Hope this helps.
Mike Maloney 66 HLY
$12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/ahbn6@verizon.net