[Healeys] Starting Rebuilt Engine BJ8

[Michael J Maloney]

Listers;

I'm getting mine started at a local reputable garage,including,smoke test
and coolant pressure test.Using rebuilder's recommended performance
break-in oil(joe gibbs).
Next pre oil using my tool to turn distributor drive , check for pressure.
Start up and run between  1800-2000 for 20 minutes varying up and
down.Change oil and filter.
I am to follow precise  directions from AERA-TB1935 nov 2001.This provides
a checklist before and after start up.Hope this helps.
Mike Maloney 66 HLY