[Healeys] Clutch and Throw out Bearing

[David Porter]

Bob, it's clear that the parts are the same dimensions...when you assemble
it, before the slave cylinder is installed make sure that the release fork
is not pre-loaded. After the slave is installed, make sure the release fork
is not pre-loaded. If those conditions are met, then you should have no
issues with premature wear. And lastly make damn sure that there is free
play at the pedal adjustment.
dave

frogeye at porterscustom.com

Porter Customs   2909 Arno NE
Albuquerque, NM USA 87107
505-352-1378
1954 BN2  1959 AN5
Porter Custom Bicycles

cars:
 www.britishcarforum.com/portercustoms.html
gallery:
http://picasaweb.google.com/porterscustombicycles/PorterCustomBicyclesStuff

GO HERE: http://porterbikes.com/  nice pictures-fun facts-my world

Subject: [Healeys] Clutch and Throw out Bearing

Hi everyone

          I have put pictures of new vs old Clutch and Throw Out Bearing at
this web address

         Please any comments before I reassemble

 
https://picasaweb.google.com/bj7healey/CompareOldVsNewClutc
h20120703#

         Also have many Tech Tips at this address