[Healeys] Stud Size Locations on 3000 Head

[BJ8 Healeys]

Patrick, see the attachments.  
The parts manual shows 6 studs of one part number and 1 of another for
attaching the intake manifold to the head.  I don't know where the odd one
goes, but I believe I used all 7 of the same part number.

Steve Byers
HBJ8L/36666
BJ8 Registry
Havelock, NC  USA

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Patrick Yoas
Sent: Thursday, August 23, 2012 12:56 PM
To: Healey Forum
Subject: [Healeys] Stud Size Locations on 3000 Head

I'm reassembling my BJ8 engine and the original Parts Book that I have says
there are 3 different size studs for the side of the Head to bolt the Intake
& Exhaust Manifolds on. Does anyone have a drawing or link showing what
studs go where? 
 
A few of them are a no brainer but why install and remove them 2 or
3 times to get them correct? The New ones I'm using are stainless steel.
Thanks,
Patrick

[demime 1.01d removed an attachment of type image/jpeg which had a name of Manifold fasteners.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of Manifold fasteners2.jpg]