[Healeys] Stud Size Locations on 3000 Head

[David Nock]

If the stud is against the exhaust manifold it takes a longer stud  
and brass nut. If a stud is only on the intake manifold it takes a  
short stud and steel nut.



David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Aug 23, 2012, at 9:56 AM, Patrick Yoas wrote:

> I'm reassembling my BJ8 engine and the original Parts Book that I  
> have says
> there are 3 different size studs for the side of the Head to bolt  
> the Intake &
> Exhaust Manifolds on. Does anyone have a drawing or link showing  
> what studs go
> where?
>
> A few of them are a no brainer but why install and remove them 2 or
> 3 times to get them correct? The New ones I'm using are stainless  
> steel.
> Thanks,
> Patrick
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/options/healeys/ 
> healeydoc at sbcglobal.net