[Healeys] push rods too long

[Austin Healey]

On our mini rally car, we also use spacers under the rockers. it is a
working solution.

Gergo

2012/8/10 Michael Salter <michaelsalter at gmail.com>

> Hi Jonathan,
> I've struck that problem in the past and used spacers under the rockers to
> solve the problem (100S).
> Unfortunately the rocker screws on a 100 come pretty close to the rocker
> cover and you may have problems with that when you raise the rocker shaft.
> I resolved that by using an extra thick rocker cover gasket..
> Failing that I think your "shorter push rod" idea may be the only solution
> I have had them made by Crowler in the past...don't know if they still do
> it.
>
> --
> Michael Salter
>
>                          *I have BJ8 water pump kits!!*
>
> On Thu, Aug 9, 2012 at 8:15 PM, Jonathan Quandt <jfaquandt at comcast.net
> >wrote:
>
> > I have run out of rocker adjuster to adjust on my 100-4.The head and
> block
> > have been decked many times and I am wondering if that is the cause or
> > this. The #7 valve is too tight to perform the cam timing test between #1
> > and #4 cylinders.
> > Any one use shorter pushrods. push rods are stock. Regards, Q
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/pajtamuvek@gmail.com