[Healeys] push rods too long

[Michael Salter]

Hi Jonathan,
I've struck that problem in the past and used spacers under the rockers to
solve the problem (100S).
Unfortunately the rocker screws on a 100 come pretty close to the rocker
cover and you may have problems with that when you raise the rocker shaft.
I resolved that by using an extra thick rocker cover gasket..
Failing that I think your "shorter push rod" idea may be the only solution
I have had them made by Crowler in the past...don't know if they still do
it.

-- 
Michael Salter

                         *I have BJ8 water pump kits!!*

On Thu, Aug 9, 2012 at 8:15 PM, Jonathan Quandt <jfaquandt at comcast.net>wrote:

> I have run out of rocker adjuster to adjust on my 100-4.The head and block
> have been decked many times and I am wondering if that is the cause or
> this. The #7 valve is too tight to perform the cam timing test between #1
> and #4 cylinders.
> Any one use shorter pushrods. push rods are stock. Regards, Q