[Healeys] Windshield header rubber - BJ8

[Alan Seigrist]

Probably there are other better suggestions out there, but I used
3M Upholstery adhesive with good results.  It keeps a good seal when the
hood's up and locked down and the seal hasn't come off in 25 years.  No
water leaking at all.

On Tue, Oct 18, 2011 at 8:59 AM, Jonas Payne <JPayne at thorcon.net> wrote:

> So, the 2nd product has now failed to adhere the rubber seal to the
> "lip" on my convertible top (the rubber gasket that makes the seal
> against the windshield top).
>
> 1st I used a rubber cement that supposedly attaches rubber trim to cars.
> The 2nd one was a 2 part epoxy that supposedly does the same thing.
>
> The epoxy has left behind a hard "plastic" on the header rail, but
> didn't stick to the rubber.
>
> What product should I be using for this?
>
>
> Jonas Payne
> PBR
> Cell:   (702) 358-5084
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com