[Healeys] brake switch
Richard Kahn
tahoehealey at hotmail.com
Tue Oct 4 23:04:36 MDT 2011
Thanks all for the conformation.
Rich Kahn
Date: Wed, 5 Oct 2011 10:25:48 +0800
Subject: Re: [Healeys] brake switch
From: healey.nut at gmail.com
To: tahoehealey at hotmail.com
CC: healeys at autox.team.net
Rich -
Never use any sort of sealant on your brake system anywhere. The fittings are
compression fittings and they always seal by design, unless the fitting is
damaged. If you have to use sealant/teflon tape, then you need to replace our
fittings because it's not safe.
Best,
Alan
On Wed, Oct 5, 2011 at 6:47 AM, Richard Kahn <tahoehealey at hotmail.com> wrote:
I just replaced the brake switch on my BJ8 and I wanted to be sure no sealant
was supposed to be used. I found none on the old part and did not want to
contaminate the brake fluid. Am I correct?
Thanks
Rich Kahn
_______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com
More information about the Healeys
mailing list