[Healeys] brake switch

[Alan Seigrist]

Rich -

Never use any sort of sealant on your brake system anywhere.  The fittings
are compression fittings and they always seal by design, unless the fitting
is damaged.  If you have to use sealant/teflon tape, then you need to
replace our fittings because it's not safe.

Best,

Alan

On Wed, Oct 5, 2011 at 6:47 AM, Richard Kahn <tahoehealey at hotmail.com>wrote:

> I just replaced the brake switch on my BJ8 and I wanted to be sure no
> sealant
> was supposed to be used. I found none on the old part and did not want to
> contaminate the brake fluid. Am I correct?
> Thanks
> Rich Kahn
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com