[Healeys] lost parts

[Rich C]

Sorry John, according to the Parts List, under Controls, Page 5, no spacer
on LH drive cars. Also though I seem to recall 5/16" UNF threads on those
bolts, why does the Parts List call for two 52K 1574 Setscrews, which are
specific Austin part numbers instead of them being a standard BMC hardware
number. That's why I thought they are BSF.

Rich Chrysler

-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of Alan Seigrist
Sent: 2011-10-03 5:20
To: John Harper
Cc: <healeys at autox.team.net>
Subject: Re: [Healeys] lost parts

Oh boy, I think my BN1 is missing this spacer, that's why the brake master
doesn't line up properly?  I had been shoving washers in there to try to
line it up, I thought my chassis was damaged.  Learn something new every
day.

Alan

On Mon, Oct 3, 2011 at 3:31 PM, John Harper <ah at jharper.demon.co.uk> wrote:

> Just a correction here. On the early BN1, the gearbox (not including the
> overdrive) the rear axle if four stud spiral bevel and the front and rear
> suspension were BSF threads.