[Healeys] lost parts

[Curt/Nancy Arndt]

Mike,

The two long bolts you need are slightly different in length.  I will look
and see if I can get you the exact measurements.

Failing that, just take the master cylinder to your local hardware store and
get two machine bolts where the thread protrudes past the housing and will
thread into the captive threads on the frame (from about 1/2  to 3/4 of an
inch)

Grade 5 will work fine (that's essentially equivalent to  the Grade "R:
bolts that were used originally), or Grade 8, but don't use Grade 2.

Cheers,

Curt

On Sun, Oct 2, 2011 at 11:40 AM, Mike Sinclair <phoenix722 at comcast.net>wrote:

> Help.  This is my first posting, so hope I am doing it right.  I am putting
> my
> car back together after a long time, and can't find a couple of small
> parts.
> These would be the two bolts that hold the brake master cylinder in place.
> They screw into threaded holes.  If you could advise me as to what size,
> maybe
> I could find them.  I don't know whether they are American or Whitworth
> or.......?
>
> At least I still have the master cylinder.
>
> Austin Healey 100-M
> BN2
>
> Thanks in advance.
>
> Mike
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/cnaarndt@gmail.com