[Healeys] nuts

Mike Sinclair phoenix722 at comcast.net
Tue Nov 22 20:53:55 MST 2011


DOH.  I told you it had been a long time since I worked on this car.  Maybe I
shoulda bought a Miata.

Tx.

Mike
BN2
-----------------------------------------------------------------------------
---

  ----- Original Message -----
  From: Alan Seigrist
  To: Mike Sinclair
  Sent: Tuesday, November 22, 2011 6:51 PM
  Subject: Re: [Healeys] nuts


  Hi Mike -


  Moss will have these in stock for sure.  You've probably looked up the wrong
part number.


        57 031-294 $3.60 NUT, U.N.F.
       BN1 from C.E.222571, BN2, BN4, BN6 10




  On Wed, Nov 23, 2011 at 9:57 AM, Mike Sinclair <phoenix722 at comcast.net>
wrote:

    No.  The nuts on the studs that hold the brake drum on.  Sorry for the
confusion.  Car has WW.

    Mike
    BN2
----------------------------------------------------------------------------

      ----- Original Message -----
      From: Alan Seigrist
      To: Mike Sinclair
      Cc: Healey Forum
      Sent: Tuesday, November 22, 2011 4:42 PM
      Subject: Re: [Healeys] nuts


      Mike -


      By the way, do you mean the big octagonal nut?  If so you will probably
have to get it used.


      Alan





      On Wed, Nov 23, 2011 at 8:36 AM, Alan Seigrist <healey.nut at gmail.com>
wrote:

        Mike -


        Try British Car Specialists in Stockton CA, they will have the correct
ones in stock.


        By the way if you are in the NW, you have these guys who have a fair
number of common parts:


        http://www.bpnorthwest.com/


        Best,


        Alan



        On Wed, Nov 23, 2011 at 6:57 AM, Mike Sinclair
<phoenix722 at comcast.net> wrote:

          Well, nuts is the right word, I guess.  I wrote earlier about
removing the
          nuts holding on the rear hub of my BN2.  Finally got them all off,
but had to
          use "Bolt Off", which sort of destroyed those nuts.  But at least it
got them
          off.  Now, where can I find some replacements?  I don't want to just
put a
          regular hex nut on, although I guess it would work.  Maybe.  I tried
Moss, but
          couldn't find.  I have been away from this so long I don't know
where the
          parts stores are, anymore.  So, any suggestions?  I live in the NW,
so the
          nearer here the better.
          TIA.

          Mike
          BN2
          _______________________________________________
          Healeys at autox.team.net
          Donate: http://www.team.net/donate.html
          Suggested annual donation  $12.75
          Archive: http://www.team.net/archive
          Forums: http://www.team.net/forums
          Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healey.nut@gmail.com


More information about the Healeys mailing list