[Healeys] trans problem

[Pieter and Linda]

I agree that you have probably put the disk in backwards. If you have only
changed the disk, remember a thicker disk will need more  travel to disengage.
If your throw out bush, throw out arm bearing, clevis pin etc are worn then
you may just not be able to get enough pressure on the pressure plate to make
it release the clutch disk,
cheers
Pieter
On 19/05/2011, at 8:26 PM, Ralph Cap wrote:

> just changed the clutch disk and now can't get the car to go in gear at all
what to do
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/pieters@pt.lu