[Healeys] looking for wheel

[jerry wall]

years ago when i had an M, mine were made by an old ca hot rodder named
Eddie Miller, Jr.  i would assume any competent machine shop could produce
them.  possibly david nock would know if they are available.
cheers,
jerry

On Fri, Apr 22, 2011 at 1:23 AM, Bob <robertlarson at att.net> wrote:

> The same issue occurs on the 100-4's if you want to use 60 spoke wheels.  I
> know as they hit on my
> front wheels so are unusable.
>
> Anybody market the spacers that you know of?
>
> Bob
>
>
> On 4/21/2011 5:26 PM, jerry wall wrote:
>
>> bear in mind, if you still have drum brakes, some 60's will not work
>> without
>> a spacer to keep the rear spokes from fouling on the drums.  check before
>> refurbishing.
>> cheers,
>>
>> On Thu, Apr 21, 2011 at 11:35 AM, White, Stephen<stephen.white at wku.edu
>> >wrote:
>>
>>  Hello listers - I'm looking for a 60 spoke rim for a 100/6.  Will be
>>> blasted
>>> and painted, so paint condition not a problem.  Will be going on a
>>> driver,
>>> but
>>> have no facilities to true the rim, so would like a straight one.  (am
>>> replacing an out of shape one) I'm located in Bowling Green, KY.  Thanks
>>> for
>>> reading.
>>> Stephen.white at wku.edu
>>>
>>
>>
>>
>


-- 
jerry wall  BN6
rowlett, tx