[Healeys] 100-M carburetors

[Bob Spidell]

I think so.  I'm working from memory here--car's at my folks' house--but the 4" tube with adapter left us very little 
room (in fact, we had to remove one of the support brackets in order for the tube to fit past the radiator).  If you use 
the flexible 'scat' tubing without an adapter you should have room, even with the carb spacer.

How did you fit up your air filter?  We just clamped ours to the rigid tube with the standard hose clamp.  We fabbed a 
little support bracket that bolts to the top of the steering box to suspend the tube/filter.

Bob


On 4/20/2011 12:36 PM, Ray Juncal wrote:
> Bob
>     I am using a K&N filter mounted in front of the radiator behind the grille and mounting the hose on the 
> rectangular end of the cold air box like the factory did.  So if I'm not using the DW adapter things should fit?  I 
> have bent the shroud support probably a bit more than the factory did and made a new shroud bracket to fit.  What do 
> you think?
> Ray Juncal
>
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************