[Healeys] battery block removal

[Michael Salter]

Hi Bob, there are three "T" nuts recessed into the block and then three long
1/4" UNF screws are installed from inside the fender well behind the wheel
which pass through the inner fender panel and into the "T" nuts in the wood
block.
The same system is used for the spare wheel blocks.

On Sun, May 30, 2010 at 6:05 PM, R. Cobb <rcobb at earthlink.net> wrote:

> I'm exploring the removal of the wooden block that the battery butts
> against and that is attached to the inner right fender on my BJ8.
>
> There are three large-bore holes in the block, apparently with the
> fasteners recessed within, but it is not clear to me how these work.
>  Suggestions?
>
> Thanks in advance.
>
> Bob
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/healeys/msalter@precisionsportscar.com