[Healeys] 100-4 flat top pistons (10:1)

[Martin Jansen]

contact Bill Mannes of Kansas city club. He lives in Independence,Mo.
He used pistons out of 50s Dodge,They fit the Healey and they are 10-1.
Bill put them in his race car. Dave Wirken of the same area would also be a
contact person if you can't reach Bill. They are a great bunch of guys out
there and I am sure they can help you.

Happy Healeying,   Marty  www.jule-enterprises.com

--- On Sun, 3/7/10, allen c miller jr <acmiller at mhcable.com> wrote:

From: allen c miller jr <acmiller at mhcable.com>
Subject: [Healeys] 100-4 flat top pistons (10:1)
To: "Healey List" <healeys at autox.team.net>
Received: Sunday, March 7, 2010, 7:31 AM

Am building race engine for Pocono (April 11th) and have run against snag.
Dennis Welch Motorsports is back ordered 4-6 wks on the flat top 88mm pistons,
which requires my sourcing a set of racing pistons elsewhere. if anyone on the
list has had a custom set fabricated by JE Pistons or a similar piston maker,
i would appreciate the specs and/or order # so i could piggyback off the
design specs? am sticking with the stock wrist pins (floating in piston,
clenched to con rod).

alternately, if anyone knows of a set for sale somewhere, would be very
interested.

also interested in speaking with anyone with experience

engine is otherwise in the works, and i am loathe to use my existing set of
0.20" over M-spec (shallow dish) pistons a stopgap measure, since it means
building a second short block for a single season's use.

also could use input from anyone with information as to locations and depths
for valve relief pockets.

thanks.

allen miller

bn2-m _______________________________________________
Healeys at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/healeys/jule_enterprisesah@yahoo.com