[Healeys] Heater Question

[Rich C]

Sounds like the one form an MGA.

Rich

--------------------------------------------------
From: "Robert Bender" <rbender9 at sbcglobal.net>
Sent: Wednesday, June 30, 2010 10:48 PM
To: <healeys at autox.team.net>
Subject: [Healeys] Heater Question

> I have begun restoring the heater from my BJ7.  Unfortunately, when I 
> began
> cleaning up the heater control bezel, I noticed it has a crack in it. 
> When I
> began looking at replacements, I was surprised to find that the text on 
> all of
> these units was very different from mine.   My bezel has (in horizontal
> letters) "PUSH" above the knob on the left and "AIR" below it.  The right 
> knob
> says "PULL TO INCREASE" above and "DEMIST" below.  However, all the
> replacements have (in letters curved above the knobs) "COLD AIR" on the 
> left
> and "AIR FROM HEATER" on the right.  I never noticed this before.  Does 
> anyone
> recognize my old heater bezel?  Was it ever used on a 3000?
> Thanks,
> Bob
> _______________________________________________
> Healeys at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/richchrysler@quickclic.net