[Healeys] Trafficator assembly

[Ron Mitchell]

Hi Peter,

This is probably more info than you need but should help you. 
http://www.acmefluid.com.au/larry/trafficator.html 

Ron
________________________________
From: Peter Schauss <rpschauss at gmail.com>
To:
healeys at autox.team.net
Sent: Mon, June 14, 2010 9:10:28 AM
Subject: [Healeys]
Trafficator assembly

Last weekend I took my trafficator apart for cleaning
and relubrication
since the self cancellation function was getting a bit
erratic.  (I guess
that this is something one should do every 15 years or so
whether it needs
it or not.)  

Inside the unit are two screws brass screws
which hold the wires for the
left and right turn signals.  The heads of these
screws fit into hexagonal
recesses in the plastic but there is nothing to keep
them from falling out
unless the turn signal wires are attached and the nuts
tightened. This means
that the wires from the harness have to be attached
before the trafficator
is reassembled (which is what I did).  Is this correct
or did I miss
something?

Thanks,
Peter Schauss
1963 BJ7
1980 MGB
_______________________________________________
Healeys at autox.team.net
Donate:
http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/healeys/healeyron@yahoo.com