[Healeys] Rubber seal around wing windows

[robertduquette at sympatico.ca]

Assembly is reverse ...

So ... for assembly (#9) you then "replace and remove" the rubber?  :)
RD

> From: jpayne at ThorCon.net
> To: banjojohn at cox.net; healeys at autox.team.net
> Date: Fri, 4 Jun 2010 09:19:25 -0700
> Subject: Re: [Healeys] Rubber seal around wing windows
>
> Yes,
>
> You need to take darn near the whole thing apart.
>
> 1)  Remove upper armrest
> 2)  Remove Chrome spear on outside of door
> 3)  Remove Window winder and door latch
> 4)  Remove inner door panel
> 5)  Remove screws holding on chromed frame
> 6)  Carefully remove door glass
> 7)  Remove Chrome Frame
> 8)  Remove vent glass from chrome frame
> 9)  Remove and replace rubber
> 10) Re-Assemble in reverse
>
> Since you have to do all that, you might as well replace your window
guides,
> fuzzy strip and window rubber too.
>
>
>
> Jonas Payne
> Director of Preconstruction
> Thor Construction
> PH:    (702) 269-2007
> Fax:   (702) 269-7095
> Cell:   (702) 358-5084
>
> -----Original Message-----
> From: healeys-bounces at autox.team.net
[mailto:healeys-bounces at autox.team.net]
> On Behalf Of banjojohn at cox.net
> Sent: Friday, June 04, 2010 8:29 AM
> To: healeys at autox.team.net
> Subject: [Healeys] Rubber seal around wing windows
>
> Hi listers:
> Does anyone know an easy way to replace the rubber seal around the wing
> windows on a BJ8?  It looks to me like you have to tear half the door
apart.
> Thanks for any help
> John O'Brien
> '61 bugeye
> '65 BJ8
> _______________________________________________