[Healeys] water pump

[Greg Mandas]

Catch it before I'm left stranded.  That makes sense. I'll start looking more often.

Thanks 

Greg

Sent from my iPhone so please excuse typos and brevity. 


On Jul 22, 2010, at 10:07 PM, Bob Spidell <bspidell at comcast.net> wrote:

Greg,

The hole is an inspection port (really).  Your water pump in all probability has sealed bearings--no greasing required.

bs


Greg Mandas wrote:
Dan,

Sorry, I should have been more explicit.  My water pump doesn't have a plug. It's got a hole. It's on top and rather ragged looking, almost as if it were a flaw in the casting. I can see into the pump between the pump and pulley bearings. 
I originally thought it was bad and ordered a replacement and there's that same hole.  
I guess I should put some greese in it. The whol;e is on top so I guess it'll stay.

Greg 

 


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************