[Healeys] a shroud repair question

[Bob Spidell]

As a point of trivia, heliarc is TIG (or GTAW).  Originally, helium was used as the shielding gas--and still is in some 
applications (sometimes aluminium)--but nowadays it's usually argon or an argon-CO2 mix.

Bet your welder was an 'old timer.'


bs



redlands ron davies wrote:
> Roland,
>  
>  
>      I had a shop in Yucaipa repair my shrouds on the modified.  He used
> Heli-arc, or is that Heliarc, method.  ( Maybe it should be Healey-arc ? )  No
> problems to date and that has been ten years.
> 
>  
> Cheers
> Redlands Ron

*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************