[Healeys] fire wall heat shields

[pennell at cox.net]

Bob,

I used some boiler insulation material which I got locally from a specialty supplier.  It came in 2x4ft sheets 1/4 inch thick at around $8 per sheet.  It is made of a ceramic I believe.  Also much lighter than hardibacker.  Cuts easily with a butcher knife.

Keith Pennell

---- nir6709 at aol.com wrote: 
> hi, is there anyone that have made the shields that go on the firewall,if so
> where can can I get patterns for this I was planning on using hardi backer
> from home depot any tips on what not to do,or what else I should use for
> material. thanks for everybody's input.Bob