[Healeys] fire wall heat shields

[Jonas Payne]

Hardi backer worked fine - just make sure you do your layout such that the
"not grid" side is showing

Jonas Payne
Director of Preconstruction
Thor Construction
PH:    (702) 269-2007
Fax:   (702) 269-7095
Cell:   (702) 358-5084


-----Original Message-----
From: healeys-bounces at autox.team.net [mailto:healeys-bounces at autox.team.net]
On Behalf Of nir6709 at aol.com
Sent: Monday, January 18, 2010 2:31 PM
To: healeys at autox.team.net
Subject: [Healeys] fire wall heat shields

hi, is there anyone that have made the shields that go on the firewall,if so
where can can I get patterns for this I was planning on using hardi backer
from home depot any tips on what not to do,or what else I should use for
material. thanks for everybody's input.Bob
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys

You are subscribed as jpayne at thorcon.net

http://www.team.net/archive

"This email and any attachments are confidential and intended solely for the
use of the individual or entity to whom they are addressed.  If you have
received this email in error please contact the sender(s) at (702) 269-2007
and delete all copies from your system.  It is not the intent of the sender to
solicit any person or business.  Please note that any opinions in this email
are solely those of the author and do not necessarily represent those of Thor
Construction, Incorporated.  Finally, the recipient should check this email
and any attachments for the presence of viruses.  The company accepts no
liability for any damage or loss caused by any virus transmitted by this
email."