[Healeys] Dual tone BN2 -front curve pattern needed

Rich C richchrysler at quickclic.net
Mon Apr 12 18:53:03 MDT 2010


Sorry to differ Alan, but that's not correct. There was only a pressing on 
the inside as a trial for a sort time to attempt to stiffen these large 
expanses of flat metal on some front fenders, the front surfaces of these 
were lead loaded so the swage line still disappeared over the chrome spear. 
Nothing to do with BN2's vs. others. They also tried closing the vent slot 
toward the end of BN2 production, and some very late cars may or may not 
have had these on one or the other or neither, or both.
No production Hundreds had a 6 cylinder swage carrying on down the wing like 
a 6 cylinder wing.
Colour lines were generally toward the bottom of the cove but often varied 
and split the difference to at least make the colour line even from one 
panel to the next,

Rich

--------------------------------------------------
From: "Alan Seigrist" <healey.nut at gmail.com>

> Tadek -
>
> The BN2 should have the front swage line embossed behind the wheel opening
> like all 6-cyl healeys.  Only the BN1 had no front swage line.  maybe
> fenders are swapped?
>
> Cove colors always start from the bottom of the swage indentation, not the
> top.
>
> Alan

> On Tue, Apr 13, 2010 at 2:32 AM, Tadeusz Malkiewicz <
> tadeusz.malkiewicz at plusnet.pl> wrote:
>
>> Hello,
>>
>> I will be soon getting to the paint shop & I need a pattern for the front
>> fender for the dual tone BN2. Does anyone have a good picture of the
>> original lines?
>>
>> Kind Regards, Tadek


More information about the Healeys mailing list