[Healeys] 1960 BN7 interior

[Rich C]

Tim,

Before we go any further, is this a commercial kit or are you working this 
carpet from scratch?

I can help you here including pictures, but it will make a big difference 
depending on whose carpet set you're using and if it's cut and detailed per 
original or not.

Rich

--------------------------------------------------
From: "Tim Davis BN7" <tld6008 at mchsi.com>
Sent: Monday, April 05, 2010 7:18 PM
To: "Healey list" <healeys at autox.team.net>
Subject: [Healeys] 1960 BN7 interior

> I need some guidance on completing finishing the floor and transmission 
> tunnel. I have a side shift trans and all carpet is in except for the 
> front floor and both tunnel pieces. My under seat carpet is in loose, 
> didn't know if it glues down or snaps. My rough guess at the installation 
> order is:
> 1. cover (glue) front tunnel with padding and carpet
> 2. locate where large tunnel goes and screw it in place to frame
> 3. screw down front tunnel to edges of footwell and frame at each side
> 4. cut front floor carpet and pad to fit between sills and side of tunnel, 
> glue pad to carpet
> 5. install snaps to locate carpet
> 6. fit carpet over large tunnel section and fit snaps to attach
> 7. is carpet under seats glued or snapped?
>
> Thanks in advance
>
> Tim Davis BN7