[Healeys] Carb Needle Centering

Alan Seigrist healey.nut at gmail.com
Thu Sep 24 09:29:16 MDT 2009


Bob -

Centering needles on a BJ8 carb isn't easy.  It needs to be done with
the carbs out of the car, otherwise you'll likely get a stuck dashpot
piston.

Alan

On 9/24/09, Bob Johnson <bjsbj8 at gmail.com> wrote:
> HD8. Found out yesterday that my needles were both worn at the top
> (large end) and new ones are ordered. Is there some simple way to
> center the new needles when they arrive? Can centering be done with
> the carbs in place or should they be removed? I did it in place
> before, maybe I just didn't do a good job of it.
>
> Thanks
>
> Bob Johnson
> BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut at gmail.com
>
> http://www.team.net/archive
>


-- 
Alan

'52 A90
'53 BN1
'64 BJ8


More information about the Healeys mailing list