[Healeys] Fwd: Angle Drive BJ 8

[Norman Nock]

Price ... You NEVER trim the end of a speedo cable ,this end is done on a
special tool and if you grind the end of the cable it will become frayed , my
Tech Book page 149 does not say "trim the end or run it with a drill "   the
ferrule sometimes can be moved , but if you have a cable problem you should
replace the complete cable inner and outer ( NEW )
When an angle drive cable into the trans. breaks , check page 24 in our Rare
and Hard to Find Parts Catalog for the washer that fits over the short cable
OR  if the core plug washer comes out there has to be a reason for the angle
drive to fail , if you don't find the reason it will happen again ... 
 catalogs can be downloaded  www.BritishCarSpecialists.com
       Norman Nock

--- On Sun, 9/6/09, R. Price Lindsay <price at advocateadvisors.com> wrote:

From: R. Price Lindsay <price at advocateadvisors.com>
Subject: Fwd: [Healeys] Angle Drive BJ 8
To: sjnnock at sbcglobal.net
Date: Sunday, September 6, 2009, 7:26 PM

Norman -
Following is an email I sent to a couple of listers.  
Do you have any suggestions?

Price Lindsay

Begin forwarded message:

From: "R. Price Lindsay" <price at advocateadvisors.com>
Date: September 6, 2009 6:38:58 PM CDT
To: "63ahbj7" <63ahbj7 at comcast.net>
Cc: "Michael Salter" <msalter at precisionsportscar.com>,
<coudesluijs at chello.nl>
Subject: Re: [Healeys] Angle Drive BJ 8