[Healeys] Electrical conecctors for Lucas Altette horns

[Bob Spidell]

Moss part# 157-107 for the connectors.

Have never seen any (authentic) parts for horns (inc. the rubber plate).

bs



Bob Haskell wrote:
> Thomas,
>
> The connectors are the same style as those used inside the license 
> plate lamp.  They look like an elongated bell.  Strip the insulation 
> off the wire, feed the wire up through the bottom of the bell until 
> the bare wire sticks through the top.  Fold the bare wire over, 
> spreading it out around the bell and insert the connector into the 
> socket.
>
> Bob
>
> Thomas Willig wrote:
>> Hello,
>>
>>
>>
>> I need advise on the following questions about Lucas Altette Horns:
>>
>>
>>
>> 1. How are the wires from the wiring loom attached to the horns? Bullet
>> connectors maybe? Who sells these connectors?
>>
>> 2.  Does someone sell the rubbers, isolating plate and steep plate which
>> hold the electrical connectors in place?
>>
>>
>>
>> Thanks
>>
>>
>>
>>
>>
>> Thomas Willig
>>
>


-- 
*******************************************************************
Bob Spidell           San Jose, CA            bspidell at comcast.net

*******************************************************************