[Healeys] Distributor Caps

[Mark LaPierre]

I tried to do this a couple of years ago and seems to me it was an early 
Jag. cap that fit, but expensive.
The later caps are totally different that the DM6 style .

I believe the Nocks came up with a replacement but again,  expensive. 
Whats wrong with using the
old style of using the screw in units?

You may have to go with a new after market style distributor to get what you 
want here.

Mark


----- Original Message ----- 
From: <PhilRitten at aol.com>
To: <healeys at autox.team.net>
Sent: Sunday, October 04, 2009 1:57 PM
Subject: [Healeys] Distributor Caps


> All,
>
> I'm interested in getting a replacement cap and wires for my '58 BN4 (and
> my '61 BT7). I'm looking for the type that plug in so that I can more 
> easily
> swap them in and out. (note I currently have the plug in type)
>
> When I go to the Moss website, they say that the plug in caps (#560-125)
> only work on "Late BJ7/BJ8 (25D6 Distributors)".
>
> Question: Were the later distributor caps/distributors a different size
> (i.e. larger diameter) than the early ones?
>
> My apology in advance if this has been previously discussed.
>
> Thanks,
> Phil
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as lapierrem at sbcglobal.net
>
> http://www.team.net/archive