[Healeys] BJ8 doesn't want to start Part II
Oudesluys
coudesluijs at chello.nl
Mon Mar 30 22:40:41 MST 2009
Jorge,
If you find that kind of sooty stuff in your carbs it is time for a
proper cleanout: dismantle and rebuilt. You may get away with carb
cleaner this time, but it is probably all gummed up inside and if one
piston even is stuck it is downright dirty and pot and piston may have
some dirt-corrosion which need to be cleaned and polished (good old
Brasso). SU's only operate properly when the insides are spotlessly clean.
Kees Oudesluijs
Jorge Garcia schreef:
> I followed up on some of your suggested diagnostics and found that there was no gasoline in the jet or around the jet in the carburetor body once I removed the piston/needle. I cleaned up the piston which had a light coating of sooty grease. Tomorrow I will spray carburetor cleaner into the jet cavity and check the second carburetor which had the piston stuck in the up position.
> Is there anything else I should be looking for or cleaning while I have the piston out?
> Thanks
> Jorge
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as coudesluijs at chello.nl
>
> http://www.team.net/archive
More information about the Healeys
mailing list