[Healeys] (Healeys) Radiator leak

Alan Seigrist healey.nut at gmail.com
Fri Jun 12 22:39:54 MDT 2009


You're talking about Alumaseal.  That and bahrs leaks both work well.

On 6/13/09, Patrick Yoas <pyoas at yahoo.com> wrote:
>     I once owned a '70 Jag XJS V12 and normal maintenance was to add two(2)
> satchels of Bars Leak to radiator after flushing out. I never had a problem
> with leaks.
>
>     Also, semi-trucks (aka: 18 wheelers), often use a radiator additive
> available at any truck stop for leaks in their cooling systems. I can not
> think of the exact name at the moment, but it wasn't expensive and worked
> great. It was something similar to Bars Leak, or might have actually been
> the
> same thing but was available in a powder form.
>
>     I would not put a whole container of this in a Healey radiator but just
> enough to do the job. It very well could assist someone in a temporary
> repair
> of a leaky casting plug or radiator. Good enough for $20k engines, should be
> good enough for a Healey engine.
>     Patrick
>     BJ8
>
>
>
>
>
>
>
>
>
>
>
>     Subject: Re: [Healeys] radiator leak
>     To: Healey Mail List <healeys at autox.team.net>
>     Message-ID: <4A32A08F.8090006 at ix.netcom.com>
>     Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>     My BJ7 had a radiator leak I could never manage to get a solder to keep
>
> - Ignored:
>     shut.  At various times over the years I tried stop leak products.  Most
>     seemed to put in some sort of particulate material that would swell
>     somewhat in water.  Some worked -more or less- for a time.
>
>     Over the years my faithful beast ran hotter and hotter.  When I finally
>     tore down the engine in year 25 I found the dead spaces in the water
>     jacket - around the base of each cylinder and up as much as half way- to
>     be filled with a deposit roughly the texture of soggy newsprint.  Fine
>     insulation preventing cooling.
>
>     So I do not recommend commercial stop leaks.  However, I must admit that
>     the pepper idea sounds intriguing in that I suspect it would stay in
>     suspension and not deposit.
>
>     Cheers,
>
>     Pete Pollock
>     Palo Alto, CA, USA
>
>
> - Done.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut at gmail.com
>
> http://www.team.net/archive
>


-- 
Alan

'52 A90
'53 BN1
'64 BJ8


More information about the Healeys mailing list