[Healeys] Footwell Heat shield 100 BN2 -spacers and washers

[Richard Korn]

Thomas,

On my BN2 all of the original asbestos is still in place and the washers are 
all round. 2 on each of the 2 panels where the pedals come out  and the same 
on the next panels above.I don4t have the size but can measure them when I 
get back to the states in 2 weeks if someone else doesn4t answer first.

Richard
----- Original Message ----- 
From: "Thomas Willig" <twillig at ruda.de>
To: <healeys at autox.team.net>
Sent: Monday, July 13, 2009 8:45 AM
Subject: [Healeys] Footwell Heat shield 100 BN2 -spacers and washers


> Were are the 1" square spacers on  the "asbestos" heat shield on the BN2
> used:
>
> On all pieces?
> No spacers at all?
> Only on the shield above the muffler?
>
>
>
> Were can I get the big washers with only a 3/16" center hole which are
> used to attach the heat shield to the body?
>
>
>
> Thanks
>
>
>
>
>
> Thomas Willig
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as rkorn at simnet.is
>
> http://www.team.net/archive 

[demime 1.01d removed an attachment of type image/jpeg which had a name of asb footwells+ 008.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of asb footwells+ 006.jpg]

[demime 1.01d removed an attachment of type image/jpeg which had a name of asb footwells+ 011.jpg]