[Healeys] Fw: Seat Adjusters

[Mirek Sharp]

I just went through the procedure prescribed by Rich and  they look great. 
It is important to get an even finish when glass beading the zinc plating 
and I would experiment a bit or impress on whoever is doing it that you want 
a consistent finish.

Mirek
60 BT7

original message
> Steve,
> The seat tracks were a dull zinc finish. I replicated this by having them
> bright zinc plated (or buy new bright zinc ones), then have them lightly
> "dusted' with glass beads to end up with a matt silver finish.