[Healeys] Rear Axle

[richard mayor]

The axle housings are different as you point out. The axles are the same.
Richard

> Date: Mon, 5 Jan 2009 05:44:31 -0800
> From: bspidell at comcast.net
> CC: healeys at autox.team.net
> Subject: Re: [Healeys] Rear Axle
>
> My factory parts book for BJ7s and BJ8s shows one part number for cars
> from 17551 to 26704 and another for cars from 26705. The difference
> appears to be the brackets for the radius arms on the late BJ8s (earlier
> cars had a panhard rod).
>
>
> Bob
>
>
>
> PG wrote:
> > Hi All,
> >
> >
> >
> > Does anybody know if the rear axles for the late model series 2 BJ8's are
> > the same as the earlier model 3000's?
> >
> >
> >
> > I know that the suspension was changed to allow for greater clearance but
> > not sure if the changes included the axle.
> >
> >
> >
> > Thanks for the help.
> >
> >
> >
> > Paul
> >
> >
> >
>
>
> --
> *******************************************************************
> Bob Spidell           San Jose, CA            bspidell at comcast.net
>
> Failure is the opportunity to begin again more intelligently. -
> Henry Ford
> *******************************************************************
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as mayorrichard at hotmail.com
>
> http://www.team.net/archive

_________________________________________________________________
Its the same Hotmail.. If by same you mean up to 70% faster.
http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_hotmail_acq_broad1_12
2008