[Healeys] motor rebuild

David Nock healeydoc at sbcglobal.net
Thu Feb 5 14:13:59 MST 2009


There are many upgrades that can be done depending on what you want  
to put into it.

	Light flywheel 		Will allow the engine to rev up much easier,  
increase horse power, less load on engine

	Light Pistons			Less spinning weight more power

	Performance Cam	This is the heart of the performance, there are  
several options here and you will still have a good idle

	Headers				Any time you make power you have to get the exhaust out  
headers will allow the exhaust to get out faster, this will also help  
pull in fresh air fuel mixture

	Aluminium Head		Less weight, flows better but very pricey

When doing the machine work to the motor you should balance the  
motor, line bore block, align rods, deck block and head, Fit guides  
and stainless valves and seats.

The cylinder head you can do some polish work	to the intake and  
exhaust ports.




David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767

www.britishcarspecialists.com
.
.

On Feb 5, 2009, at 3:26 AM, john doe wrote:

> looking to rebuild a 3000 motor but looking to get more hp out of  
> it what are the available options without putting in a cam that  
> would make a rough idle any articles out there
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healeydoc at sbcglobal.net
>
> http://www.team.net/archive


More information about the Healeys mailing list