[Healeys] Brake reservoir slosh

[Freese, Ken]

Great. That's it.
Thanks to all.
Ken

-----Original Message-----
From: Dallas Congleton [mailto:dcongleton at embarqmail.com]
Sent: Wednesday, December 23, 2009 10:33 AM
To: Freese, Ken; Healeys
Subject: Re: [Healeys] Brake reservoir slosh

This was a post by Bob Haskell and a couple of comments a few months ago
about using a gasket from the "Help" section of the auto parts stores-

"The no splash 'gasket' that Moss sells (582-505) for the brake fluid
reservoir is Dorman Help! part number 42072 for various GM models
2004-1987.  Might be available at your local auto parts store.
Bob"

this link was also posted for info:
http://www.mossmotors.com/graphics/products/PDF/582-505.pdf

Our local Autozone had the gasket. It did require a slight trim around
the edge to fit in the cap.
Dallas



----- Original Message -----
From: "Freese, Ken" <Kendall.Freese at Aerojet.com>
To: "Healeys" <healeys at autox.team.net>
Sent: Wednesday, December 23, 2009 12:30 PM
Subject: [Healeys] Brake reservoir slosh


>I think there was a tech tip not too long ago on making a new gasket to
> prevent sloshing of the brake fluid out the cap breather hole.
> Does someone remember that?
> Thanks,
> Ken Freese
> 65 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as dcongleton at embarqmail.com
>
> http://www.team.net/archive


------------------------------------------------------------------------
--------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.430 / Virus Database: 270.14.117/2583 - Release Date:
12/23/09
08:28:00